Filter your selection below:
We offer paper and plastic banding machines ranging from table-top models to three-shift production models. These are ideal alternatives to shrink wrapping and are commonly found at the end of folders for the banding of batched folded items, etc.
Turning the corner from banders, if your need is different, we can also discuss string tying, strapping (mail tubs, etc.), rubber banding or shrink film banding as further options.
Whether being fed by hand, set feeder for pre-collated digital output or traditional collating towers, we have a booklet-making solution for every budget and volume. From the shortest run digital job solutions to high speed, high production solutions, the automation is across the board and will give you the power to handle all your customer’s booklet needs in a profitable and efficient manner. Square back? Got it!
Thinking of hanging a booklet-maker at the end of your digital engine? Before doing so, you might want to read The Great Debate.
Business cards have become an incredible commodity-based, necessary evil for many print shops. Some shops are still cutting cards on a guillotine cutter which certainly doesn’t help with the low profit margins that already exist in the world of business cards.
We offer a multitude of business card slitters from smaller table-top units to systems that can knock out over 20,000 cards per hour! Increase your output, efficiency and profit with one of our many business card slitting solutions.
Today’s tower collators can produce collated sets at a scorching rate of up to 10,000 per hour! We also offer customized solutions for collating non-typical, oversized sheets or items as thick as 1”. From basic collating/stacking needs to custom designed and built collating systems, we’ve got a solution to fit every application.
While the majority of numbering is now done digitally, there are still occasional needs for impact numbering and we have the solutions for those applications! Perfing needs? We have stand-alone perf units as well as combo units that will perform both numbering and perfing.
Creasers are an absolute must for any digital environment. From table-top to production units, we offer a full range of options that will fit any budget and volume and spell the end of your image cracking issues. Taking it one step further, a Creaser/Folder provides the complete solution in a single time-saving pass. Most of these systems will perf as well.
These are must have items in all digital operations that are in need a letter-press quality score provided by an easy to use and operator friendly machine.
If you live in a 13” x 19” digital world, we have your cutter! If you live in a high-demand production world, we have complete and automated cutting systems and peripherals that will afford you the efficiencies and profitability you need in cutters up to 88” in width.
Often times, people think their cutting bottleneck will be solved with an additional cutter. The reality is, what’s frequently needed is NOT another cutter but, instead, the peripherals that can enhance cutting throughput on most any cutter by up to 70%. Automation now goes as far as robotic turning of the lifts! We’ve got the solutions that will increase your throughput and cutting efficiency.
Baumann-Perfecta offers a variety of automated solutions for EVERY SINGLE STEP of the complete cutting process, end to end! This is the future of cutting!
Check out these videos that show some of the automation:
Shorter run, smaller format die-cutting has become huge and only a digital solution will make it profitable for you. We offer a full range of options that will allow your entry into this growing market. Certain models will even pull from a roll of pre-printed material versus cut sheet.
Door hangers, labels, bottle-neckers, stickers, odd shaped biz cards, playing cards, custom invitations, pocket folders…. endless money-making opportunities await you!
While the methodology is still the same, our traditional, smaller format, cylinder-type die-cutters are much simpler to operate and can open the door to a whole new category of profit potential. From shorter run to full-size production units, we have a solution.
These units are perfect for items such as bottle-neckers, door-hangers, etc. but are also ideal for the basics such as biz cards, etc. Pocket folders? Yes! Versus our digital die-cutters, these options give you the speeds to tackle longer runs in a profitable fashion.
From floor standing and table-top single spindle drills up to 10 spindle drills and a wide variety of cornering solutions in various radiuses, we’ve got what you need for all your drilling and round cornering needs.
Call it what you want, custom finishing, packaging, etc. we’ve got what you need. We can feed most anything and batch and bundle it as needed. Tipping? Can do! Contact us with your application(s) and needs and we’ll provide functional and application driven options for getting the job done profitably..
We have solutions for collating non-typical oversized sheets or items as thick as 1”. Flow wrappers, bag filling, bag sealing, scales? Got it. Want a peek at what custom collating systems can be like? Check this out!
The world of print embellishment is absolutely as strong as any other part of our industry. This is the sort of offering that takes you out of the “commodity box”, sets you apart from the competition and brings you a profit margin unlike most any other work that passes through you shop.
For example, an easy to do, touch of foil on a biz card instantly moves it out of the commodity box and into the “higher margin” box. Compliment the foil with our digital coating solutions which provide raised and spot coating at the touch of a button!
We offer economical, low-cost foiling solutions that can easily get you started in the world of embellishment!
Read more on this in the Packaging and Embellishment section of Future of Print, as well as the Inkjet section of Future of Print.
With options ranging from table-top to small format Pharma and full size (29.1” x 43.3”) folders, we have whatever folder you might need. With our full range of automation, folding can be a profitable part of your finishing operation.
Automation is the key word! Imagine one sheet of paper being used to gap an entire system. Imagine making all gate adjustments from the touch screen. Enter a sheet size, pick a fold pattern from pre-set or memory, and the system sets itself in seconds. It’s widely accepted that the average time spent on setting up an older, manual folder is 45 minutes. Complicated jobs such as a map fold can take 1-2 hours to set up. With our automation, that job is up and running in a couple minutes and the waste factor is slashed as well! The labor savings realized by this technology makes for a quick return on the investment.
Why consider gluing versus tabbing? Because it’s one less step than tabbing, gluing is far, far faster and a few droplets of glue are far less expensive than a tab is.
We offer solutions for folders, mailing production and more. From simple one-head systems or spine gluing of 8 to 16 page brochures, all the way to complex applications in the direct-mail sector with code reading and glue monitoring, we have your solution.
Whether installed on one of our folders or a different brand, we can make it happen!
Put the power of automation to work in your laminating department and watch the profits take off! Load the job, push a few buttons and walk away while your work gets laminated and four-side trimmed while the operator is working elsewhere.
Single or double sided, flush cut or encapsulated, we have your automated laminating solutions!
Soft touch laminate? Got it!
With a wide variety of table-top to production grade punches and finishing options, we’ve got every volume and budget covered when it comes to the world of plastic coil and twin loop binding. We offer solutions from table-top to twin loop production systems capable of giving you up to 1,800 bound books per hour!
Coil forming? For higher volumes, this is the next step in additional profitability. Got it!
Punching? In-line or off-line, yes, we’ve got punching and in most any die configuration imaginable. From basic table-top solutions to high-powered units producing 110,000 punched sheets per hour. We’ve got your punch!
From single clamp up to 17 clamps in PUR or EVA, we have an automated solution for every perfect binding need ranging from book-of-one production up to 6,000 bph production. Whether it’s a stand-alone binder, roll to finished book or a complete system with in-line gathering and trimming, we’ve got the solution you’re looking for.
Want to know more about the differences between PUR and EVA? All you need to know can be found in the Future of Print.
Roll to fold? Roll to bind? Roll to stack? Roll to booklet? Been there, done that. Unwind and sheet and go from there. We have the complete, end to end solutions that will maximize your efficiencies and profitability in this higher-end work.
Traditional saddlestitchers still have a place in some shops but the majority of operations have seen their run lengths drop significantly which has created needed change in saddlestitching methodology. If your booklet runs are typically under 35,000 you owe it to yourself to look into the reasons why so many printers have left the world of folding sigs for a traditional saddlestitcher and are now cutting down to four pagers which are then accumulated, dropped on a saddle and three side trimmed.
These fully automated, high production systems have become the norm in a growing number of finishing operations. Systems can be configured with collating towers only, set-feeder only (for pre-collated digital output) or a hybrid system using both feed options.
From simple all-in-one manual models to fully automated, in-line, high production models, we have your shrink wrapping needs covered! Looking for a less expensive, generic film that’s comparable to a name brand film that you might be using now? We’ve got that as well. Hit up our consumables tab for more info. We’ll provide a sample and cost saving options.
A slitter/cutter/creaser is the perfect complement to your digital printing output. It’s truly the “Swiss Army Knife” of digital finishing tools! With perfing capabilities as well, it’s a must for any digital operation. Biz cards, invitations, box perfs, postcards and so much more. Load it and walk away while it finishes your digital output.
We offer a variety of models with options that will greatly enhance the efficiency of your digital finishing. These time saving, money making multi-taskers never call in sick or go on vacation
Put the power of a fully automated, stand-alone three-side trimmer to work for you today, or, if your production demands are higher, we have the in-line, three knife trimming solutions that will power you through the longer run work!
How about book-of-one, variable trimming in-line or off-line? Got it.
The world of print embellishment is absolutely as strong as any other part of our industry. This is the sort of offering that takes you out of the “commodity box”, sets you apart from the competition and brings you a profit margin unlike most any other work that passes through your shop. Our digital coating solutions allow for raised and spot coating at the touch of a button! Add our foiling solution for the complete embellishment package.
A touch of foil on a biz card instantly separates it from the non-foiled card and thus creates a higher perceived value…..and profit. The same can be said for spot or raised UV.
Read more on this in the Packaging and Embellishment section of Future of Print, as well as the Inkjet section of Future of Print.
Hand-fed or with a feeder, we offer a complete range of UV Coaters that can handle the shortest and longest runs that will pass through your finishing department. Coating digital output? No problem. Been there, done that.
Interested in a lower cost UV, AQ or specialty coating? Check out our options on the consumables tab. We offer same or better results at a lower cost and will provide samples. Inventoried in our own facility so it’s there when you need it and there are no concerns over freezing issues during winter months shipping.
Read more on this in the Packaging and Embellishment section of Future of Print, as well as the Inkjet section of Future of Print.
Need help with a particular application or equipment solution?
© 2024 Precision Graphics. All logos and products represented on this website are copyright their respective owners.
Site designed & developed by Blair Strategic Marketing.
